Waste Ink Counter Reset Epson cx3900

Here this step to reset Counter printer epson cx3900

1. Switch on printer
2. Set the computer date setting date to 23 january 2007
3. Run adjprog.exe from the extracted folder
4. Click accept
5. Click particular adjustment mode
6. Go to maintenance then Select waste ink pad counter then click ok
7. Click on “check button” till its done then click on “initialization button” then click on “finish button”
8. Switch off printer for 5secs then switch on again
9. After you reset succesfully, you can change the date back to normal

Read more ...

How to Reset Canon i80 Waste Ink Tank Full

This tutorial to reset waste ink in the printer canon i80. I not yet tried this tutorial, because this tutorial is I get from forum service printer. following step bt step to reset printer Canon i80 :

• Close the print head cover, and turn off the printer.
• While pressing the Resume/Cancel button, press the Power button *.
• While holding the Power button, release the Resume/Cancel button **.
• While holding the Power button, press the Resume/Cancel button three times, and then release the Power and Resume/Cancel buttons ***. During initialization, the LED blinks in green.
• When the LED stops blinking and lights in green, press the Resume/Cancel button the 4 times ***.
• Press the Power button. The LED lights in green, and the selected function is performed. When the operation completes, the printer returns to the menu selection mode automatically.
• Power off the printer and then back on and test.
  

Note :

• (Do not release the buttons. The LED lights in green to indicate that a function is selectable.)*
• (Don’t release the Power button.)**
• (Each time the Resume/Cancel button is pressed, the LED lights alternately in either orange or green, starting with orange.)***

Read more ...

How to Reset Waste Ink Counter Canon Pixma iX5000 and iX4000

To reset counter Canon PIXMA iX4000 or iX5000 you have to enter to service mode. Procedure to enter to service mode on Canon PIXMA iX4000 or iX5000 is as following :

1. Connect the Canon PIXMA iX5000 or iX4000 printer to the power cord. ( note : If the automatic power-on function is enabled in the printer, the printer enters the service mode for the first time, but it will never enter the service mode if the printer is turned off by the Power button. This is because the printer remains to be turned on internally if the power is turned off by the Power button. To prevent this, disconnection of the power cord is required before starting the printer in the service mode ) .
2. With the Canon PIXMA iX5000 or iX4000 printer powered off, while pressing the Resume/Cancel button, press and hold the Power button. (note : Don’t release the buttons. The Power LED lights in green to indicate that a function is selectable.)
3. While holding the Power button, release Resume/Cancel button. (Don’t release the Power button.)
4. While holding the Power button, press Resume/Cancel button 2 times, and then release both the Power and Resume/Cancel buttons.
5. When the Power LED lights in green, press the Resume/Cancel button 4 times to reset waste ink counter in the Canon Pixma iX5000 / iX4000. (note : If the Power LED does not light in green the printer does not enter the service mode, disconnect the power cord and plug it again. Then start from step 1 to start the printer in the service mode again).
6. At the end of the service mode, press the Power button. The paper lifting plate of the sheet feed unit will be raised.
   

Note :

• Each time the Resume/Cancel button is pressed, the Alarm and Power LEDs light alternately, Alarm in orange and Power in green, starting with Alarm LED.

Read more ...

ERROR E27 Waste Ink Absorber Full Canon PIXMA MP150 MP160 reset

E27 Destroy ink absorber chockablock or platen scourge ink absorber ample Ravine PIXMA MP150 Pic All In One Printer.

Hold asset of pro picture writing with a 4800 x 1200 dpi declaration. Canons Penalty cartridges use extremum 2pl ink droplets. This delivers elaborate and saturated prints for all your photos.

Ravine PIXMA MP150 Pic All In One Machine Indication a icon lab degree 10 x 15 cm borderless image in roughly 55 seconds in Touchstone fashion. Get fasting borderless yield from a soft entry carte situation aright up to A4. Or use the PIXMA MP150 as a standalone copier delivering up to 22 copies per bit in monaural and up to 17 copies per microscopic in stuff.

Ravine PIXMA MP160 All-In-One Icon Machine theres no necessary to purchase a split detector that present bear up artefact place in your role. Instead, you can rely on this wedge unit to rake with a upper document of up to 600 by 1200 dpi (optical) and 19,200 by 19,200dpi (interpolated). With a 48-bit interior justify depth and the potentiality to flock with documents up to 8.5 x 11.7 inches, the MP160 present spring you jock results in liquid E27 Wastefulness ink absorber rumbling

1. With the machine supercharged off but connected to a cause publication, mould the Land switch patch imperative and retentive the Stop/ Reset fix.
2. When the Cause is lit, estate the Stop/Reset button two present patch imperative and retentive the Index button.
3. When releasing the Noesis secure and the Grab / Set fasten (disregarding of rule), the printer will act into a employment way. (Inactivity for schedule pick)
4. When the on/off lights in gullible, mold the Stop/Reset add the mere number of clip(s) according to the usefulness traded in the fare beneath.

(Each measure the Stop/Reset button is pressed, the LED lights alternately in orange and naive, play with orangeness.)

Billet : counsel 4 present for drain ink tabulator correct.

The identify of the Adjust add pressing LED Role Remarks :

0 reading Veggie Commonwealth off
1 instant Chromatic Maintenance imitate exposure (auto teste)
2 times Greenness EEPROM photo (dados da EEPROM)
3 nowadays Orangeness EEPROM adjust (EEPROM correct)
4 present Unripened Wild ink sideboard adjust (Absorvente reset)
5.Flop off the machine.( it must be favour off) then transmute it on again.

Read more ...

Canon Multipass F30 F60 F80 waste tank reset code

Resetting the Waste Ink Volume Counter


1) Enter SERVICE MODE.....By pressing Menu THEN Copy THEN #.
2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [OK] key. (On F30 printers, skip step (6) since there is no [OK] key .)
7) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.

Read more ...

Epson R200 R210 R300 R310 Waste Ink Counter Pad Reset

Here is how to reset the waste counter for the Epson R200, R210, R300 and R310 printers.

• Press and hold “Stop”, “Maintenance”, and “Power” buttons for about 10 seconds. A message will come on the screen saying counter is reset and to turn the printer off. The R200 and others don’t have a screen so just wait until the 10 seconds is up.
• Turn the printer off, unplug the power cord. Wait about 1 minute and power the printer back up. The counter will be reset. That’s all there is to the reset procedure.
  

Is the waste pad full ?

If the waste pad is actually full and ink is about to overflow, then you need to install a waste container. You can see the waste pad by opening the access panel on the back of the printer.

Changing the waste pad requires almost complete disassembly of the printer, it is a big job. There is an easier way.

Open the access panel on the rear of the printer (remove screw) and look inside carefullly with a flashlight. You will see a tube (down and to your left) coming from the cleaning pump and it will have an open end on it. This is the tube that delivers ink to the waste pad.

Use a piece of coathanger wire or equivalent, and fish out this piece of tube. Bring it to the outside of the printer, thru the access panel.

Find yourself a suitable container (Tupperware or a plastic cup or jar) that is not too tall. Put the tube into this container and secure the tube and container so they won’t come apart or lose connection if the printer is moved.

If you wish you can make a hole or notch in the access panel cover so it can be replaced.

Now the ink will go into this container and not into the waste pad inside the printer. If it gets full, dump it.

Note: This information and a couple of photos are also available on Steve’s Digicam Forum (http://stevesforums.com/forums). Goto Printers-Photo Inkjet-Epson R200-210 & R300-310 Mod

Download Software Resetter for Epson R300-310

Read more ...

How to Reset Waste Ink Counter Canon Pixma MP145

I get from forum but still untried, just sharing for the things requiring reset procedure for Canon Pixma MP145 to reset counter in the Canon Pixma mp145. Following is the procedure to reset waste ink counter Canon Pixma MP145 :

• Connected Printer to a Power source, Turn off the printer if printer on
• With the Printer power off, press the Power button while press and hold Stop/Reset button.
• When the Power led is light, press Stop/Reset button two times while pressing and holding the Power button.
• When releasing the Power button and the Stop/Reset button (regardless of order), the printer will move into a service mode. (Waiting for menu selection)
• When the on/off lights in green, press the Stop/Reset button four times to reset wase ink counter. For other specified number pressed function listed in the table below. (Each time the Stop/Reset button is pressed, the LED lights alternately in orange and green, starting with orange).
• Unplug cable power from a power source.

Read more ...