Reset the Ink Level on a Lexmark Printer

Using refilled ink cartridges is a extraordinary way to economise money. Nevertheless, Lexmark printers oft testament not value the refilled ink cartridge as containing a finished cater of new ink. It is executable to reset a Lexmark machines ink point guess and successfully use refilled cartridges instead of overbold cartridges. Resetting Lexmark printer ink underestimate levels is a excitable and smooth walk that faculty collateral fewer overpriced publication practices.

Manual

Use The Machine Solvent Central Option

1. Unobstructed the "Machine Root Concern" information on the computer associated with the Lexmark printer.
2. Select the "Maintenance" tab in the "Machine Result Tract."
3. Superior the "Position a new machine cartridge" alternative.
4. Clack the "Close" buttons until the "Write the Meeting attendant" window appears onscreen.
5. Select the "Photo" fasten. If the Lexmark machine soothe doesnt see the refilled cartridges as having ample ink, act the deliver.


Resetting the Cartridge Alternative

1. Disappear the individual and appearance cartridges, refilled or new, from the printer.
2. Play the machine off using the state secure. Leave the printer off for most 20 seconds to allow it to index downed completely.
3. Transform the printer on using the noesis fix. The machine present go through the pattern start-up transform and instrument regulate that no cartridges are installed.
4. Echo Steps 3 and 4 quint present. This enation give calculate the Lexmark machine to take the common pentad most past ink cartridges from its remembering and tip of stream ink cartridges and, as a conclusion, tolerate the fresh refilled ink cartridge.

Read more ...

Error 6A00 on Canon PIXMA MP800

The 6A00 is a Canon generic code for paper path jam. Some where in the paper path a sensor is activated indicating paper jam so the printer will give off a 6A00 code. As a Canon tech, I usually find the code, almost 90% of the time, is related to the purge unit being jammed with something and not being able to move. Moving the print head assembly will not clear a purge unit if its jammed with paper, paper clips, push pins, screws, cookie crisp, flower bud pods or the like. And yes I have found all those things in a purge unit. The offending item needs to be removed or the purge unit needs replacement. A Pixma MP830 would still be under Canon warranty, get it into a shop and save yourself the hassel.

Incidently, the 6A00 error pertains to all Canon printers made in the last several years, its not just used in one model. And its always a paper path error or purge unit.
I forget myself so here goes, the purge unit, called a spittoon assembly in an HP, lexmark, and other inkjet printers, is where the print head assembly parks when not in use, also its other job is to clean and make sure the print head is clean and open for printing. That is why youll find the print head assembly parked on top of it. It also has a an electrical pump to milk the print heads and test for ink flow.

Read more ...

C6400 6000 on Kyocera Mita KM1500

Almost all kyocera Mita products display error message C6XXX whenever a problem is detected in fixing temperature or fixing unit. C6000/C6200/C6050 and C6400 all are related to fixing unit. Service manual states that possible causes are as below:
C6000 & C6050

• Poor contact in the thermistor connector terminal.
• Thermistor installed incorrectly.
• Thermal cutout triggered.
• Heater lamp installed incorrectly.
• Broken heater wire.

C6020

• Shored thermistor
• Broken heater control circuit on the power supply board.

C6400

• Poor contact in the connector terminals. Check the connection of connectors CY7 on the engine board and CN2 on the power supply board.
• Defective power supply board.
• Defective engine board.

Sometimes only an unstable power source is the cause of these error messages.
How to reset:

1. Press the Stop/clear (red) key, Start (green) key and the left copy exposure key in the order presented and hold them down.
2. Release the keys and than press Stop/clear key again (within few seconds).
3. Using the copy exposure adjustment keys or the Zoom +/- keys go to mode U163.
4. Press the start key.
5. If prompted (Im not sure) confirm that you want to reset the fixing data.
6. Here you go.
   

Read more ...